Anybody know what metric size wrench to use on the motor oil drain plug? Evilution says 24mm, but that is too big.

Views: 693

Reply to This

Replies to This Discussion

Use a 15/16" Box end wrench=same as 24mm.
Make sure you use a 6 point socket, or you'll wreck it...
Unless you have a 450, or someone has replaced the plug, it should fit.
24 mm is the correct size for the stock 451 oil drain plug.
Yes, 24mm should fit just fine. Use a good quality wrench; I've seen cheap wrenches that are off by a bit. Also, my preference is to use a wrench, not a socket.
24mm works, I did not get an expensive set either just go to Harbor Freight and get a set for about 10 bucks.. don't forget to get a two foot breaker bar. TRUST ME! it's a god sent...

Reply to Discussion

RSS

find a

smart center

go

Photos

Loading…
  • Add Photos
  • View All

Videos

  • Add Videos
  • View All

© 2014   Mercedes-Benz USA, LLC.

Badges  |  Report an Issue  |  Terms of Service