I love my Scangauge. It did not include installation instructions so I used my imagination and came up with what I believe is a simple, inexpensive and safe install method. If you are interested just let me know and I will get back to you.

Views: 49


You need to be a member of smart USA insider to add comments!

Join smart USA insider

Comment by CubeFX on March 2, 2010 at 1:18pm
Here is my install.

Comment by Jim VW on March 1, 2010 at 1:18pm
A scangauge or more correctly ScangaugeII is a device that plugs into the OBD port and gives you the option of a bunch of readouts, MPG, Water Temp, RPM, Speed, timng, etc. You can also track how far since last fillup, next fillup, etc, Kind of like a trip computer. It has the function to read engine error codes and clear them. In the development stage, the Area451 cruise will be letting the SGII program the throttle response.( Guess they are still working out the details) An awfully handy little device to have, you can set it up for other cars you own as long as they have the port. Simple to set up and just as easy to remove.

MPG is not 100% accurate, the best way is the old pencil and paper method.
Comment by SRWills on March 1, 2010 at 12:35pm
Does anyone have pictures of the installation? And how well does it track MPG?
Comment by Fred on February 28, 2010 at 12:54pm
I mounted mine above the rear view mirror and ran an RJ45 extension cable from the sg along the top of the windshield, down the left side to the bottom of the dash (all under the molding). It is so light, it stays in place with velcro and looks pretty good, too.
Comment by spicejax on February 28, 2010 at 12:34pm
Post your how to, let's see your good work.

Comment by Evans on February 27, 2010 at 11:48pm
Out of curiosity...... what is a scanguage, and what does it do? Evans (Mighty Mouse)
Comment by james g on February 27, 2010 at 9:38pm
i mounted mine with an articulated arm with a suction cup to the lower left corner of the windshield, the gauge is visible as being just over the left side of the steering wheel while driving, i could add photos later if you like.
Comment by Jim Prevo on February 27, 2010 at 4:19pm
Me too. I installed mine in 2008. I used velcro to mount it on the left side of the dash and ran the cord down between the dash and the sidewall. Very simple and looks good.

find a

smart center



  • Add Photos
  • View All


  • Add Videos
  • View All

© 2017   Mercedes-Benz USA, LLC.   Powered by

Badges  |  Report an Issue  |  Terms of Service